Important NaEx Information

Sprayer Tank Mixing
Insure that NaEx is mixed at a ration of 40 parts water to one part product. Fill tank 1/2 the required water and begin agitation. Slowly add NaEx. Add remaining water.

Fertigation/Irrigation Injection
Mix NaEx with enough water that will allow the injection system to easily and proportionally uptake and deliver the product. Insure NaEx is thoroughly mixed with water. Once mixed the product will remain in suspension.

Furrow or Ditch Head Irrigation
NaEx should be metered at the water source for furrow flooding. Rates should be increased by 25% utilizing this method of application and irrigation. Engine, water flow powered, or electrical metering pumps may require NaEx by diluted with water to insure proper uptake by the metering pump.

NOTE:
Please note that the polymers contained in NaEx are highly conductive, therefore TDS electrical conductivity readings are ineffective. We recommend plant tissue analysis and/or soil analysis to determine sodium and chloride percentages.